Home  |  About Us  |  Services  |  About Silver  |  Contact Us
Contact

Platinum process
Industrial & decorative electroplaters
Geeta industrial estate.
Unit no-7, ground floor,
I.b.patel road,
Goregaon (e), mumbai-400 063.
Ph: off: 26855739
Fact: 26855825

Our Services

 
INDUSTRIAL & DECORATIVE SILVER PLATING ON ALUMINIUM.

SILVER PLATING ON ALUMINIUM Process sequence :

  1. Degreasing in cleaner followed by water rinse for COPPER PLATING ON ALUMINIUM.
  2. Dip in the aluminum cleaner followed by water rinse for COPPER PLATING ON ALUMINIUM .
  3. Dip in the diluted Nitric acid dip followed by water rinse for COPPER PLATING ON ALUMINIUM .
  4. Dip in aluminum zinc ting solution followed by water rinse for COPPER PLATING ON ALUMINIUM .
  5. Dip again in the diluted Nitric acid dip for removing zinc ting from the job followed by water rinse for COPPER PLATING ON ALUMINIUM .
  6. Dip again in aluminum zinc ting dip followed by water rinse for COPPER PLATING ON ALUMINIUM .
  7. Keep the job in copper plating bath for for proper cooper coating, followed by water rinse for COPPER PLATING ON ALUMINIUM .
  8. After doing copper plating from copper bath material is plated in acid copper bath with brightener system which gives mirror bright finish .

  9. For depositing more micron’s of copper coating it takes more time for getting desired thickness or micron’s on the job, it depend upon total surface area of job for COPPER PLATING ON ALUMINIUM .
  10. Silver Strike: Items are placed in the silver strike tank. This places a very thin silver coating at a very fast rate prior to the heavy deposit for Silver PLATING ON ALUMINIUM .
  11. Silver Plating: Items are placed in the silver tank. Current and duration is set to suit the particular work. Items are rinsed in the silver rinse tanks to remove any excess of silver plating solution on it. Items are then dried by placing in the dryer for Sil Items are placed in the silver strike tank. This places a very thin silver coating at a very fast rate prior to the heavy deposit for Silver PLATING ON ALUMINIUM .
  12. Anti-tarnish finish is applied for Silver PLATING ON ALUMINIUM . le. While we have taken reasonable care during compilation of this document, we assume no responsibility for any error or discrepancy in the information herein. You must make appropriate judgment without any prejudice or compulsion.
  • Disclaimer:This document is for information purpose only. Certain information herein has been acquired from various external sources believed to be reliable. While we have taken reasonable care during compilation of this document, we assume no responsibility for any error or discrepancy in the information herein. You must make appropriate judgment without any prejudice or compulsion.
  • ©2012-2013 PlatinumProcess Home | About Us | Services | About Silver | Contact Us